Peak Design Mobile mount that keeps the stand (loa)
A printed adapter with four 8 × 2.7 mm magnets that hooks the uConsole onto a Peak Design Mobile / RAM setup while retaining the original kickstand.
What it takes
- 3D print
- Purchase required
Difficulty 1 of 3 — easy.
Details
loa wanted the console on an existing Peak Design Mobile and RAM mount setup without giving up the stock stand, so the adapter carries the Peak Design interface and leaves the kickstand in place. It needs four round 8 × 2.7 mm magnets; the prototype was PETG at 0.2 mm and it is described as a first iteration.
Links
Open at Printables — uConsole Stand PeakDesign MountRelated mods
A CNC-plus-printed modular backplate for the CM5 with triple-18650 power, active cooling, up to ten antenna mounts and a mic array, sold as design files.
A commercially machined anodised aluminium back with an integrated heatsink, fan mount and magnetic battery door, sold with a fan or as a $29 STEP file.
A one-piece printed replacement back for a CM5 on the HackerGadgets adapter, clearing the NVMe board, an active cooler and the AIO v2 antenna board.
A hinged printed case that guards the screen and body in a bag and snap-holds the four antennas of a HackerGadgets AIO board; also sold printed by G7UFO.
A full printed shell with reinforced corners, a hinged logo lid over the screen, a built-in stand, an antenna enclosure and a camera-strap adapter.
JGM's armour revised around the HackerGadgets AIO board: an enclosure on top holds the board and its antennas with the SMA connectors accessible.