Honeycomb Storage Wall holder (Matthew Bogner)
A wall holder for the uConsole generated with the parametric HSW OpenSCAD script, so it drops straight onto a Honeycomb Storage Wall.
What it takes
- 3D print
Difficulty 1 of 3 — easy.
Details
Matthew Bogner ran Keith's OpenSCAD HSW generator with the console's dimensions so nobody else has to; the result clips into a Honeycomb Storage Wall. Print with supports from the build plate — the rear attachment points do not sit flush. Published December 2025.
Links
Open at Printables — HSW uConsole holderRelated mods
A two-plate printed shelf for 6 mm pegboard holes on a 25 mm pitch, sized to park the uConsole on the wall; about 3.5 h to print.
A handle that screws on where the kickstand was and has a sliding door over a small storage pocket; CC BY 4.0 on MakerWorld, about 1.9 h to print.
A CNC-plus-printed modular backplate for the CM5 with triple-18650 power, active cooling, up to ten antenna mounts and a mic array, sold as design files.
A commercially machined anodised aluminium back with an integrated heatsink, fan mount and magnetic battery door, sold with a fan or as a $29 STEP file.
A one-piece printed replacement back for a CM5 on the HackerGadgets adapter, clearing the NVMe board, an active cooler and the AIO v2 antenna board.
A hinged printed case that guards the screen and body in a bag and snap-holds the four antennas of a HackerGadgets AIO board; also sold printed by G7UFO.