Pegboard shelf for the uConsole (狩护)
A two-plate printed shelf for 6 mm pegboard holes on a 25 mm pitch, sized to park the uConsole on the wall; about 3.5 h to print.
What it takes
- 3D print
Difficulty 1 of 3 — easy.
Details
The shelf hangs on pegboards with 6 mm holes at 25 mm centre spacing and holds a uConsole or similar small device. Print profile 0.2 mm, three walls, 15 % infill, about 3.5 h over two plates; Standard Digital File License (non-commercial).
Links
Open at MakerWorld — Pegboard Shelf for uConsoleRelated mods
A wall holder for the uConsole generated with the parametric HSW OpenSCAD script, so it drops straight onto a Honeycomb Storage Wall.
A handle that screws on where the kickstand was and has a sliding door over a small storage pocket; CC BY 4.0 on MakerWorld, about 1.9 h to print.
A CNC-plus-printed modular backplate for the CM5 with triple-18650 power, active cooling, up to ten antenna mounts and a mic array, sold as design files.
A commercially machined anodised aluminium back with an integrated heatsink, fan mount and magnetic battery door, sold with a fan or as a $29 STEP file.
A one-piece printed replacement back for a CM5 on the HackerGadgets adapter, clearing the NVMe board, an active cooler and the AIO v2 antenna board.
A hinged printed case that guards the screen and body in a bag and snap-holds the four antennas of a HackerGadgets AIO board; also sold printed by G7UFO.