uConsole cover (pizza247)
A bare MakerWorld listing for a printed uConsole cover under CC BY-SA, with no description or print notes — judge it from the photos.
What it takes
- 3D print
Difficulty 1 of 3 — easy.
Details
pizza247's model is a cover for the console with an empty description, so the photos on the listing are the only guide to what it protects and how it fits. Listed for completeness because it is one of the few cover models under CC BY-SA; the research dossier dates it to June 2025.
Links
Open at MakerWorld — uConsole coverRelated mods
A calculator-style slide-on cover for the whole console, modelled in OpenSCAD and printed without supports in about 8 h; STL and SCAD are downloadable.
A hinged printed case that guards the screen and body in a bag and snap-holds the four antennas of a HackerGadgets AIO board; also sold printed by G7UFO.
Small printed corner and edge protectors plus a sleeve for the stand rod, guarding the parts of the shell that wear without making the console bulkier.
A printed cover for the HackerGadgets antenna board in a compact version with SD access and an extended version that also covers the slot and power button.
A support-free printed shroud that bolts onto the console with four M4 × 6 screws in place of the stock ones, for looks and a little edge protection.
The cases owners have confirmed: USA Gear's GPD Pocket and 7.5-inch monitor hard shells (≈ $17), a ProCase organiser that clears AIO antennas, and more.