Micro antenna 0.2 mount remix with a countersunk screw (Ememell)
A remix of m3x's micro antenna 0.2 mount that seats a countersunk screw and adds a second mount point.
What it takes
- 3D print
- Disassembly
- Purchase required
Difficulty 2 of 3 — moderate.
Details
Listed on Printables as a remix of the micro antenna 0.2 mount, changing the fixing to a countersunk screw and adding a mount point; otherwise the same footprint and the same RP-SMA bulkhead arrangement as the original. Worth a look if you want the screw head flush; the antenna and pigtail notes on the m3x entry apply unchanged.
Links
Open at Printables — uConsole micro antenna 0.2 mount (Ememell remix)Related mods
The most-printed external antenna mounts for the uConsole — a small bracket on the console's own M4 screw positions with an RP-SMA bulkhead for a short whip.
The bright orange antenna module that opens the mod megathread: a printed bracket and expansion-port cover carrying a whip antenna stripped of its housing.
An external antenna mount in the m3x family that is fixed at two points, so the bracket does not hinge when you articulate the antenna.
A printed bracket that bolts to the console's flat-head M4 screw positions and carries three SMA antennas; a companion profile fits the HackerGadgets AIO board.
A single-piece remix of paragonnov's three-antenna bracket that prints as one part, so there is nothing to glue.
A tape-on printed hinge that holds the antenna flat for carrying and folds it up, clear of the metal body, when you need the signal.