Cover for the HackerGadgets antenna board (strt_fnst)
A printed cover for the HackerGadgets antenna board in a compact version with SD access and an extended version that also covers the slot and power button.
What it takes
- 3D print
- Purchase required
Difficulty 1 of 3 — easy.
Details
strt_fnst's cover shields the HackerGadgets antenna board in two styles: compact, leaving the SD card reachable, or extended, which covers the slot and the power button and adds a separate printed button (with a taller option for clearance). Each comes with and without the logo. Same designer as the back cover for the passive cooler (Thermal) and the shroud.
Links
Open at Printables — Hackergadgets cover for uConsoleRelated mods
A hinged printed case that guards the screen and body in a bag and snap-holds the four antennas of a HackerGadgets AIO board; also sold printed by G7UFO.
JGM's armour revised around the HackerGadgets AIO board: an enclosure on top holds the board and its antennas with the SMA connectors accessible.
A printed bracket that holds the HackerGadgets AC1200 card on the AIO v2's internal USB-C port and keeps it off the battery board's solder points.
A CNC-plus-printed modular backplate for the CM5 with triple-18650 power, active cooling, up to ten antenna mounts and a mic array, sold as design files.
A one-piece printed replacement back for a CM5 on the HackerGadgets adapter, clearing the NVMe board, an active cooler and the AIO v2 antenna board.
A full printed shell with reinforced corners, a hinged logo lid over the screen, a built-in stand, an antenna enclosure and a camera-strap adapter.