Retro-inspired handle case (jamescodesthings)
An 80s/90s-styled printed case with a back plate and two handles on mounting blocks, held on by the stock stand bolts, with a built-in WiFi antenna mount.
What it takes
- 3D print
Difficulty 2 of 3 — moderate.
Details
The case comes as a base, a back plate and two identical handles that attach via mounting blocks; the parts are friction-welded from inside to keep the joins clean and the whole thing is held on with the console's original stand bolts. It covers the unused HDMI and audio ports and includes an integrated WiFi antenna mount. Print flat with the handles on their sides for strength, PETG with a 0.6 mm nozzle recommended, minimal supports in hidden areas. Released to the public domain (CC0) on 13 October 2024.
Links
Open at Thingiverse — Retro-Inspired uConsole handle/caseRelated mods
A hinged printed case that guards the screen and body in a bag and snap-holds the four antennas of a HackerGadgets AIO board; also sold printed by G7UFO.
A full printed shell with reinforced corners, a hinged logo lid over the screen, a built-in stand, an antenna enclosure and a camera-strap adapter.
JGM's armour revised around the HackerGadgets AIO board: an enclosure on top holds the board and its antennas with the SMA connectors accessible.
A basic printed case with a hinged screen cover, meant as a starting framework others can extend; the hinge pin is a length of filament melted into rivets.
philosiraptor's rugged printed shell in several variants, including a sun shade, released with STL and Fusion 360 files days after the official CAD appeared.
A replacement front faceplate styled after the Commodore Amiga and C64 era, in a supported version with better screw alignment and a flat no-support version.